Optimum Opti-Lens Permanent Headlight Coating

Optimum Opti-Lens Coating is the most advanced polymer system that is specifically designed for the protection of headlight lenses. This hybrid resin in a combination of Opti-Coat 2.0 ceramic resin and an acryllic resin for maximum bonding and protection of acrylic and polycarbonate lenses. Additionally, Optimum Opti-Lens Coating contains high levels of UV absorbers to minimize discoloration and fading of automotive headlight lenses.

Optimum Opti-Lens Coating is highly concentrated and one tube is enough to cover 5-6 sets of headlights. Once applied, Optimum Opti-Lens Coating will for a permanent bond to the surface and can only be removed by polishing or paint removers.

Application Instructions:

1. Clean headlights with Optimum Paint Prep to remove any oils, waxes or sealants.
2. Remove all the oxidation by sanding and then polishing the headlights.
3. Wipe down the entire lens with a clean damp microfiber towel to remove any polishing residue.
4. Prime the applicator pad by making an X pattern across the pad. Only a few drops will be needed per headlight lens.
5. Wipe Optimum Opti-Lens Coating on the headlight lens in  a circular or back and forth direction.
6. Within 5 minutes, inspect the headlight with adequate lighting, looking for any thick areas that have not flashed away to clear. 
7. Use the foam applicator or a clean microfiber towel to wipe down and remove any excess.