Optimum Gloss-Coat - 20cc

• New ceramic polymer formula offers increased scratch and mar resistance, UV resistance and chemical etch resistance that competing products.
• Can be topped with any non-abrasive maintenance product to extend durability.
• Apply to painted surfaces, wheels, plastic trim, bumpers, aluminum and chrome surfaces.
• Lasts up to three years.

The new Optimum Gloss-Coat has added Ceramic polymers and is the most advanced polymer system that forms a layer of clear coat over automotive finishes. The new Ceramic Gloss Coat provides better scratch and mar resistance, better UV resistance, better chemical etch resistance and has better release properties than any other consumer Ceramic product while providing unsurpassed gloss and slickness. You can top the new Ceramic Gloss Coat with any non-abrasive maintenance product of your choice to add additional gloss and slickness. 

You can use Optimum Ceramic Gloss-Coat to protect painted surfaces, wheels, plastic trim, bumpers aluminum and chrome surfaces for up to three years. 

How to apply Optimum Ceramic Gloss Coat: 

1. Wash and polish away imperfections as desired.
2. Clean surface with Optimum Paint Prep to remove any oily residues.
3. Prime the included applicator by making an X pattern across the pad. 
4. Wipe Gloss-Coat onto a single panel at a time in a thin layer using two directions, in a circular or front to back direction.
5. Wait no more than 5 minutes, then inspect the panel, with adequate lighting, looking for any thick areas that hove not flashed away to clear.
6. If you find any thick areas, a clean, dry microfiber towel to level out uneven spots. If these uneven spots cure, you will have to polish them off.
7. Repeat steps 4-6 on each panel you wish to coat. After originally priming your applicator, only a few drops of Gloss Coat will be needed for each subsequent panel.

Size: 20cc