Nasiol PPFGuard - 50 ml

• A flexible nano-coating designed to increase the performance of paint protection films.
• Adds hydrophobic, UV resistance and self clean properies.
• Lasts up to 18 months.
• Safe on glossy, matte and satin finishes.
• Does not change the structure of films with self-healing feature.

Nasiol PPFGuard is a flexible nano-coating designed to increase the performance of paint protection films. It adds hydrophobic, UV resistance and self cleaning properties to extend the life of the film. Use PPFGuard to protect paint protection film including matt and transparent polyurethane (PU), high quality PVC films and vinyl for up to 18 months. 

PPFGuard is applied in two layers with very short waiting time between coats. You can confidently apply PPFGuard without spoiling the physical properties of glossy, matte and satin finishes. It prevent color fading due to the sun and does not change the structure of films with self-healing feature.

How to apply Nasiol PPFGuard:

1. Wash, decontaminate and polish (if your surface is suitable) your car to the desired level.
2. Prepare the surface using Nasiol Clean to remove any remaining polishing oils to improve the bonding performance of PPFGuard.
3. Wrap an included suede cloth around the applicator block and pour the necessary amount onto the suede cloth.
4. Apply XR03 in a crosshatch pattern.
5. Once beading occurs (this takes 30 - 60 seconds) gently wipe the surface using the included Nasiol Microfiber cloth in a straight line motion. 
6. After your initial leveling, complete the final buffing gently with the included Nasiol Microfiber Cloth in circular motions.
7. Repeat steps 4, 5 & 6 around the entire car.
8. Following application of the first layer, wait 60 minutes, then repeat the steps for the second layer.
9. Keep coated surfaces away from direct sunlight, contaminants and water for 24 hours after application. Wait 48 hours before washing.

Application tips: 

• Do not apply on low quality PPF, PPF with bubbles, absorbent surfaces, temporary road films, interior window tints and any film without resistance to solvents.
• Ideal temperature 74F and 50% relative humidity.
  
• If the ambient temperature or relative humidity are higher than suggested, the product may cure faster than expected.
• Change your sued cloth every 3 - 4 panels.
• 5 - 8 ml is enough for one 3 ft. x 3 ft. section.

Specifications:

• Durability: Up to 1.5 years
• Chemical Resistance: 12>pH>1
• Salt Water Resistance: Yes
• Moisture Resistance: Yes
• Water Contact Angle: 102@10 uL
• Water Sliding Angle: 12-18@20 uL
• Consumption:
  • Small Vehicles (A-B Class): 20 - 30 ml
  • Medium Vehicles (C-D Class): 30 - 40 ml
  • Large Vehicles (E Class & SUV): 40 - 50 ml

Size: 50 ml