McKee's 37 Ceramic Headlight Coating - 4 oz

• Protects headlight lens from UV fading and discoloration.
• Leaves lenses crystal clear and protected.
• Lasts up to 3 years.
• Can also be used on exterior plastic-chrome pieces and exterior piano black trim.
• One bottle is enough to coat up to 50 headlight lenses.
• Includes:
• (1) McKee's 37 Ceramic Headlight Coating - 4 oz bottle
• (1) McKee's 37 Coating Applicator
• (1) McKee's 37 Microfiber Towel

McKee's 37 Ceramic Headlight Coating is a nano-glass ceramic coating designed specifically for polycarbonate headlight and taillight lenses. This high-solids formula adds an extra layer of protection over new or restored headlight lenses. Keeping and leaving your lenses crystal clear and protected for up to 3 years. 

This coating was designed to prevent UV-induced fading and discoloring! Applying McKee's 37 Ceramic Headlight Coating to a brand-new vehicle will save you hundreds, if not thousands of dollars by preventing costly headlights from deteriorating. Application is an inexpensive insurance for providing a clear view of the road ahead for years to come.

You can also apply McKee's 37 Ceramic Headlight Coating to plastic-chrome pieces and piano black exterior trim. Doing so will protect these surfaces from UV-induced fading, etching from bug splatter and swirl marks from improper wash technique.

If you are professional, one bottle of McKee's 37 Ceramic Headlight Coating will protect up to 50 headlight lenses. This makes it a cost effective option for upselling headlight restoration on older cars and headlight protection on new vehicles.

How to protect headlight lenses with McKee's 37 Ceramic Headlight Coating:

1. Ensure all oxidation and yellowing has been removed from the lens surface. 
2. Wipe lens down with a prep product to remove any traces of polishing oils.
3. Apply McKee's 37 Ceramic Headlight Coating with the included applicator using a side to side, then up and down motion.
4. Immediately remove excess product with a clean, lint-free microfiber towel like the one included.
5. Allow coating to cure 6 hours before exposing to water or moisture.

Size: 4 oz.