Maniac Line Water Spot Mineral Remover - 500 ml

• Safe and powerful specific decontaminant for the removal of mineral contaminants, superficial oxidation, water spots and acid rain.
• Safely use on glass, paint, plastics and chrome.
• Ready to use, easy to use, and non-abrasive formula.
• Safe and effective on all exterior surfaces.

Maniac Line Water Spot Mineral Remover is a powerful specific decontaminant for the removal of mineral contamination caused by highly sedimented water spots that can no longer be removed with your normal wash process. This ready to use, non-abrasive product chemically dissolves mineral contaminants, superficial oxidation, water spots and acid rain from windows and bodywork.

Left untreated, these contaminants can eat through your car's clear coat finish. It is your ideal choice for decontaminating glass, paint, plastics and chrome exterior surfaces. Use before applying sealants, coatings or wax to improve durability!

Before turning to Maniac Line Water Spot Mineral Remover, always proceed with your normal wash process! If at the end of drying there remain stains or water spots, grab a bottle of Water Spot Mineral Remover to safely and effective remove contaminants!

Instructions for use:

1. Always wash and dry surface to be treated prior to use. Make sure vehicle is cool to the touch and in the shade.
2. Apply directly onto the surface and allow to dwell for 30 seconds. 
3. Wipe with a damp microfiber towel and finish with a second clean, dry microfiber towel. 
4. If stain persists, repeat process allowing the product to dwell for no more than 60 seconds ensuring product does not dry on the surface. 

Pro Tip: When using on windshield or rear window; clean half a window at a time and then rinse. For large areas on the bodywork apply product directly and uniformly to one panel at a time. Then rinse with clean water before moving onto the next panel. You can use a soft bristled brush for less accessible parts such as badges, locks, wheel nuts or moldings.

Size: 500 ml