Maniac Line Foam Gun Prewash - 4.5 L

• A powerful and safe foaming prewash with dry and compact foam.
• Removes up to 80% of coarse dirt present on the bodywork without any mechanical action.
• Eliminates smog, road dirt, midges, organic residues of plants an birds and softens firmly anchored dirt.
• Highly economical thanks to its high dilution ratios.
• Use frequently, it will not wear previously applied protective agents including coatings.

Maniac Line's Foam Gun Prewash is the fundamental product that makes hand washing your car safer and more efficient! Prewash is capable of removing up to 80% of coarse dirt present on the bodywork without you touching the car! Any remaining dirt is softened, making it easier and safer to remove with your hand wash!

Dirt particles are firmly anchored to the bodywork. If you do not carry out a correct pre-wash, that dirt will be transported by your wash media with the risk of creating micro-scratches or swirls. Prewashing will make all the difference! Take advantage of its chemical action to remove coarse and firmly anchored dirt, allowing your handwash to be more effective and safer!

Foam Gun Prewash is highly concentrated and versatile prewash that can be used with a foam cannon, foam gun or foaming pump sprayer. Its powerful and safe formula creates dry, compact foam that clings to the car. It eliminates smog, road dirt, midges, organic residues of plants or birds and softens firmly anchored dirt. Use frequently as it respects previously applied protective agents including coatings.

Recommended Dilutions:

• Foam Cannon or Foam Gun:
  • Summer: Dilute 1:10 in your canister for a final output of 1:100.
  • Winter: Dilute 1:5 in your canister for a final output of 1:50.
• Foaming Pump Sprayer:
  • Summer: Dilute 1:100 (1 cap into 1 liter of water)
  • Winter: Dilute 1:50 (2 caps into 1 liter of water)

Instructions for use:

1. Dilute product according to above recommendations and make sure the vehicle is out of direct sunlight.
2. Remove any mud first with a jet of water. If during the summer, rinsing the car to cool it down is preferable.
3. Spray a thick layer of foam on the vehicle, starting at the bottom and working your way up. Wait for it to run off, but do not allow the product to dry on the surface. 
4. Rinse with strong jet of water.
5. Proceed to hand wash your car.

Pro tip: It is recommended that you apply Foam Gun Prewash always from the bottom up, working on half the car at a time ensuring that the foam is never allowed to dry on the surface.

Size: 4.5 Liter - Also available in a 1000 ml size