Labocosmetica SAM + HPC 2.0 Ceramic Coating Kit - 30 ml

• A coating system lasting 4-years plus that offers the perfect balance of ease of application with physical and chemical protection.
• SAM offers physical protection against scratches.
• HPC offers chemical resistance and an amazing self cleaning effect.
• Cars are left with a three-dimensional gloss that provides a deep shine and enhances the color of the paint.

Labocosmetica looks at coatings differently than other companies. They view coatings through the lens of what type of protection do they offer, physical and/or chemical. Physical protection refers to the coatings ability to protect the paint against scratches. Chemical protection refers to its water beading and chemical resistance.

The combination of SAM plus HPC provides 4-years plus protection with the perfect balance of ease of application with physical and chemical protection. SAM is an 80% physical, 20% chemical coating that combines both types of protection into one coating! HPC is a 100% chemical coating.

When combined, you have a car that is very well protected against scratches while also having excellent chemical resistance, an amazing self-cleaning effect and a three-dimensional gloss that provides deep shine and enhances the color of the paint.

How to apply Labocosmetica SAM + HPC:

1. Thoroughly wash, decontaminate and polish the car to your desired level.
2. Thoroughly prep wipe the car with VERITAS diluted 1:5 to remove any polishing oils, old waxes or sealants prior to SAM application.
3. Pour a few drops of SAM onto the included applicator and microsuede cloths.
4. Apply SAM with light pressure in a crosshatch pattern in small sections of 50cm x 50cm.
5. Wait 2-5 minutes until streaks with tiny bubbles appear. Dry time will be impacted by temperature and humidity. The warmer or more humid it is, the shorter the dry time.
6. Using a short pile microfiber towel, remove any remaining residue in a circular motion.
7. In the included instructions, you will see Labocosmetica breaks the car down into sections, A,B,C, and D. Once you have finished working on section A, you can immediately apply the second coat HPC following the same instructions in points 3-6.
8. Once you have finished applying HPC to section A, you an move onto section B, and so on, until you've coated the entire car.

After application, the vehicle must remain dry for 12 hours. Full curing takes place within 36 hours and the car should not be washed for 7/10 days. It's not necessary, but you can accelerate the dry time with an infrared lamp, placed at a distance of 50cm for about 15-20 minutes at 60C temperature.

Size: 30 ml coatings