Labocosmetica ENERGO Water Spot Remover - 250 ml

• Water spot remover for bodywork and windows. 
• Dilutable gel formula allows quick and easy application.
• Removes limescale and acid rain contamination.

Labocosmetica ENERGO removes water spot stains that cannot be removed with normal polishing. It removes limescale and acid rain contamination from windows and bodywork considerably shortening polishing time. ENERGO is one of the few products that can help the detailer with one of their hardest tasks, the removal of water spots from the paint. 

ENERGO's dilutable gel formula allows quick and easy application depending on your needs. You can use ENERGO prior to AQUAVELOX application to degrease and purify the glass.

ENERGO has been thoroughly researched, developed and tested in cooperation with the most prestigious sports car manufacturers worldwide.

How to use Labocosmetica ENERGO:

1. Dilute ENERGO with water depending on the level of contamination to be removed.
   • For severely soiled cars, use pure. 
   • For strong and extensive limescale stains, dilute 1:5
   • For slight staining, dilute 1:10
2. Spray diluted ENERGO where necessary and spread with an applicator or brush.
3. Allow to dwell for 2-3 minutes and then rinse with water.

In the event the car is severely soiled, pour a few drops of pure ENERGO onto the surface and spread in circular movements. Allow to dwell for 5 minutes, Then wipe with a damp microfiber before fulling rinsing.

ENERGO does not damage paint and plastic parts, but in the case of delicate, soft or single-layer paints, avoid using ENERGO pure.

Size: 500 ml