Koch Chemie Headlight Polish Set

• Restore headlight clarity in as little as two steps.
• Sanding discs included for heavily yellowed headlights.
• Includes polishes and pads.
• Restore up to 50 headlights with this set.
• Set Includes:
  • Headlight Polish 1, 250 ml
  • Headlight Polish 2, 250 ml
  • Heavy Cut Pad - 3 Inch
  • Lambskin Pad - 3 Inch
  • Thermo Pad - 3 Inch
  • Abralon Sandpaper 1,000 grit
  • Abralon Sandpaper 2,000 grit
  • Abralon Sandpaper 4,000 grit
  • Hand block with Velcro for sandpaper

Koch Chemie's Headlight Polish Set gives yellowed and oxidized headlights a clear view again. With its perfectly coordinated polishes and pads, an optimal surface is created in as little as two steps. 

The set contains sanding discs of different grain sizes, a hand block with Velcro for manual sanding, Headlight Polish 1 and Headlight Polish 2 with sealing components as well as three matching pads. 

The included Thermo Pad allows good control over the temperature development of the material during processing, as the color change of the pad serves as an indicator due to its thermochromic property. 

A total of 50 headlights an be restored with the Headlight Polish Set!

How to use Headlight Polish Set:

1. Clean the headlight before starting and mask the edges of surfaces around the headlight.
2. Depending on condition, treat the headlight with abrasive discs by hand or eccentric polisher. In the case of heavily yellowed headlights, start with the 1,000 grit. Then repeat with the 2,000 grit and 4,000 grit discs until an evenly sanded surface is obtained. If the headlights are only slightly oxidized, sanding can be skipped.
3. Remove sanding marks with Headlight Polish 1 and the Heavy Cut Pad or the lambswool pad and your polisher. Apply the polish at medium speed and medium pressure in a crosswise motion.
4. Follow with Headlight Polish 2 and the Thermo Pad, polishing the headlight to a high gloss with your polisher. Apply at medium speed and medium pressure in a crosswise motion.