IK Foam Pro 2+ Sprayer

• Creates a thick layer of foam.
  
• Adds a compressed air connector for easy pressurization or hand pumping and spray application.
• Improved base for greater stability.
• Finger grips on bottle for easier screwing of the cap on and off.
• Great for mobile detailers and detailers with water restrictions.
• Total capacity of 64 oz. with a usable capacity of 42 oz.
  

The IK Foam Pro 2 Plus adds a compressed air connector; an inlet valve located in the sprayer head that allows the insertion air into the tank thanks to its universal schrader valve.

This professional sprayer has been manufactured for creation of a thick layer of dry and durable foam. It is designed to be used with chemical agents designed to foam. The Foam Pro 2 Plus has taken the Foam 1.5 and enhanced it with a professional, user-friendly design. 

Add your favorite shampoo or pre-wash to the canister, screw the cap on and pump up the pressure. Apply by pressing the thumb trigger at the top of the handle. The layer of foam generated will stick to the paint, loosening contaminants and making your wash process safer and more effective.

The IK Foam Pro 2 Plus provides the user with thick, permanent foam ideal for professional cleaning, sanitation and disinfection. HVAC system cleaning, vehicle washing and detailing, bike cleaning as well as other areas where foam generation is needed for cleaning.

Includes three tips for different types of foam:

• Orange Tip = Wet Foam
• Grey Tip = Intermediate Foam
• Green Tip = Dry Foam

Features:

• Compressed air plug.
• Safety valve with depressurization option.
  
• Protective sleeve for valve chamber.
• Wide opening for easy filling.
• Strong translucent tank with level indicator
• Tool free, easy assembly and taking apart for cleaning and maintenance.
• Better base for greater stability.
• Safety lock.
• Content identification system with colored caps
• Storage of nozzles inside the colored caps
• Total capacity of 64 oz. with a usable capacity of 42 oz.

How to use the IK Foam Pro 2 Plus:

1. Fill the canister following the dilution ratio recommended by the foaming agent you are using.
2. Pressurize the sprayer by either pumping the unit or using compressed air until the pressure valve pops out.
3. Make sure the felts are clean.