IK Foam Pro 12 Sprayer

• Creates a thick layer of foam.
• Has a compressed air connector for easy pressurization or hand pumping and spray application.
• Stable base with footrest.
  
• Stainless steel handle.
• Great for mobile detailers and detailers with water restrictions.
• Total capacity of 2.64 gal. with a usable capacity of 1.58 gal.

The IK Foam Pro 12 is a large tank sprayer perfect for detailing professionals and enthusiasts who want to foam an entire car! The large tank has a usable capacity of 1.58 gallons of mixture.

This professional sprayer has been manufactured for creation of a thick layer of dry and durable foam. It is designed to be used with chemical agents designed to foam. With the use of foam, you can increase the contact time between the chemical and surface to be cleaned. 

The translucent tank allows you to check the level of liquid inside and has a system for positioning the lance once you are done spraying. To facilitate pressurization, the Foam Pro 12 is equipped with a connector for compressed air. 

The IK Foam Pro 12 provides the user with thick, permanent foam ideal for professional cleaning, sanitation and disinfection. HVAC system cleaning, vehicle washing and detailing, bike cleaning as well as other areas where foam generation is needed for cleaning.

Includes three tips for different types of foam:

• Orange Tip = Wet Foam
• Grey Tip = Intermediate Foam
• Green Tip = Dry Foam

Features:

• Compressed air plug.
• Strong translucent tank with level indicator
• Stable base with footrest 
• Large integrated funnel for easy filling
• Easy use lance parking
• Pump holder system for when filling the tank
• Stainless steel opening and closing handle with safety lock
• Safety valve especially resistant to acids
• Tool free, easy assembly and taking apart for cleaning and maintenance.
• Safety lock.
• Content identification system with colored cards
• Total capacity of 2.64 gal. with a usable capacity of 1.58 gal.

How to use the IK Foam Pro 12:

1. Fill the tank following the dilution ratio recommended by the foaming agent you are using.
2. Pressurize the sprayer by either pumping the unit or using compressed air until the pressure valve pops out.
3. Make sure the felts are clean.
4. Spray.