Autofiber Holey Clay Decon Sponge

• Removes bonded contaminants that regular washing cannot!
• Flow-through holes flush debris away from the surface.
• Dual density foam for ergonomic control.
• Fine grade for minimal paint marring.
• Must be used with a lubricant
• Size: 5" x  3.5" x 2"

Designed to remove bonded surface contaminants, this perforated clay sponge features small flow-through holes which effortlessly lift and flush away contaminants from your vehicle's paint surface. It's inner dual density foam makes this clay sponge comfortable and easy ouse.

The Autofiber Holey Clay Decon Sponge removes bonded surface contaminants that regular washing cannot! Safely remove stubborn contaminants such as brake dust, industrial fallout, overspray, and environmental contamination with ease! The fine grade synthetic rubber polymer pulls bonded contaminants from the clear coat, leaving it smooth and ready for paint correction or protection.

How to use the Autofiber Holey Clay Decon Sponge:

• The Holey Clay sponge must be used with a lubricant or quick detail spray, such as 3D 503 Spray Detailer, to lubricate the surface for safe decontamination.
  1. The first time you go to use the Holey Clay Sponge, break it in by using it on the glass for 1-2 minutes before using it on the paint.  
  2. Spray the Clay Holey Sponge and the surface to be decontaminated with your lubricant.
  3. Gently glide the sponge across the surface in a crosshatch pattern, adding more lubricant as needed.
  4. After each section, rinse the sponge with water to clean away contaminants. 
• Once you are finished, rinse your Holey Clay Sponge with water and allow to air dry.

Size: 5" x 3.5" x 2"